Tag authentication

Configuring VMware ESXi for Active Directory (AD) authentication involves joining the ESXi host to the Active Directory domain and configuring user permissions accordingly. Here are the steps:

1. Access the ESXi Host:

• Connect to the ESXi host using the vSphere Client or vSphere Web Client.

2. Configure DNS Settings:

• Ensure that the DNS settings on the ESXi host are correctly configured, and it can resolve the Active Directory domain controller’s name. You can set the DNS configuration in the ESXi host under “Networking” > “TCP/IP Configuration.”

3. Join ESXi Host to Active Directory:

• In the vSphere Client, navigate to the “Host” in the inventory and select the “Configure” tab.
• Under the “System” section, select “Authentication Services.”
• Click “Join Domain” or “Properties” depending on your ESXi version.
• Enter the domain information, including the domain name, username, and password with the necessary permissions to join the domain.
• Click “Join Domain” or “OK.”

Example:

• Domain: example.com
• Username: domain_admin
• Password: ********

4. Verify Domain Join:

• After joining the domain, you should see a success message. If not, check the credentials and network connectivity.

5. Configure Permission:

• Go to the “Permissions” tab in the “Host” section.
• Add the AD user account to the appropriate role (e.g., Administrator or a custom role).

Example (PowerCLI):

New-VIPermission -Principal "EXAMPLE\domain_user" -Role "Admin" -Entity $esxiHost

6. Test AD Authentication:

• Log out of the vSphere Client and log in using an Active Directory account. Use the format “DOMAIN\username” or “username@domain.com” depending on your environment.

Example:

• Server: esxi.example.com
• Username: example\domain_user
• Password: ********

7. Troubleshooting:

• If authentication fails, check the ESXi logs for any error messages related to authentication or domain joining.
• Ensure that time synchronization is correct between the ESXi host and the domain controller.
• Verify that the Active Directory user account has the necessary permissions.

Note: Always refer to the official VMware documentation for your specific ESXi version for the most accurate and up-to-date information. The steps might slightly differ based on the ESXi version you are using.

Hello everyone , in this video I am going to integrate fortigate firewall with radius server , after that fortigate administrators can login and manage fortigate by using their active directory username and password.

Step 1: Log into FortiGate

Access your FortiGate device through a web browser or SSH client.

Step 2: Navigate to System Settings

1. Go to System > Settings in the FortiGate web interface.

Step 3: Configure RADIUS Server

2. Under Authentication Settings, click Create New to add a RADIUS server.
3. Fill in the following details:
   • Name: A descriptive name for the RADIUS server.
   • Server: Enter the IP address or hostname of your RADIUS server.
   • Secret: This is a shared secret key that must match the one configured on the RADIUS server for authentication. It ensures secure communication between FortiGate and the RADIUS server.
   • Authentication Port: Usually set to 1812 for RADIUS authentication.
   • Accounting Port: Typically set to 1813 for RADIUS accounting, if needed.
4. Click OK to save the RADIUS server configuration.

Step 4: Define a RADIUS Server Group

5. Under Authentication Settings, click Create New to add a RADIUS server group.
6. Give the group a descriptive name to identify it later.
7. Add the previously configured RADIUS server(s) to the group. You can use multiple RADIUS servers for redundancy and load balancing.
   • Select the RADIUS servers from the list and use the right arrow button to move them to the “Selected” column.
8. Click OK to save the RADIUS server group.

Step 5: Configure User Groups for RADIUS Authentication

9. If you want to use RADIUS for user authentication, navigate to User & Device > User Groups.
10. Edit an existing user group or create a new one based on your needs.
11. In the user group settings, go to the Remote Groups section and select the RADIUS server group you created in Step 4.

• This configuration ensures that users in this group will be authenticated against the RADIUS server.

Step 6: Testing

12. It’s essential to test your RADIUS configuration to verify that it’s functioning correctly. You can do this by attempting to log in using user accounts associated with the RADIUS server.

Step 7: Monitoring and Troubleshooting

13. FortiGate provides various monitoring tools under Log & Report where you can review RADIUS authentication and accounting logs. These logs can be instrumental in troubleshooting any issues with the RADIUS configuration.

Step 8: Additional Configuration

14. Depending on your specific requirements, you may need to configure additional options such as RADIUS accounting, timeout settings, and other advanced features. Consult the FortiGate documentation for comprehensive details on these options.

Step 9: Save Configuration

15. Make sure to save your configuration changes to ensure they are preserved across device reboots and updates.

By following these detailed steps, you can set up FortiGate to authenticate and authorize users through a RADIUS server effectively. This configuration enhances network security by centralizing user authentication and access control.