Carefully inspect the external packaging for any signs of damage.
Ensure that the package includes all the components listed in the packing list.
Open the Box:
Use a box cutter or scissors to carefully open the packaging.
Remove Accessories:
Take out all the accessories such as power cables, documentation, and any additional components that come with the server.
Inspect the Server:
Carefully take the server out of the packaging and inspect it for any physical damage.
Ensure that all components, including hard drives, are properly seated.
Documentation:
Review the provided documentation, including the quick start guide and any safety information.
1. iLO Configuration:
a. Physical Connection:
Connect to the iLO port on the rear of the server using a network cable.
Ensure the iLO port has an IP address on the same network as your management system.
b. Access iLO Web Interface:
Open a web browser and enter the iLO IP address.
Log in with the default or provided credentials.
c. iLO Configuration:
Change the default password for security.
Configure network settings as needed.
Enable iLO Advanced features if necessary.
1. Accessing Smart Array Configuration Utility:
Power on the Server:
Ensure all necessary components, including hard drives, are properly installed.
Access RAID Configuration:
During the server boot process, press the designated key (e.g., F8) to access the Smart Array Configuration Utility.
2. Creating a RAID 6 Array:
Select/Create Array:
In the Smart Array Configuration Utility, choose an option like “Create Array” or “Manage Arrays.”
Select Drives:
Choose the physical drives you want to include in the RAID 6 array. There should be at least four drives for RAID 6.
Configure RAID Level:
Select RAID 6 from the available RAID levels.
Set Array Size:
Define the size of the RAID array. Keep in mind that RAID 6 requires at least four drives, and usable capacity will be less than the total drive capacity due to the dual parity.
Confirm and Save:
Review the configuration and confirm to save the RAID 6 array settings.
3. Installing an Operating System:
Boot from Installation Media:
Insert the installation media for your operating system (e.g., Windows Server, Linux) and boot from it.
Select Installation Drive:
During the OS installation process, you will be prompted to select the logical drive created by the RAID 6 configuration.
Complete OS Installation:
Follow the on-screen instructions to complete the operating system installation.
4. Additional RAID 6 Management:
RAID Monitoring:
After the OS is installed, monitor the RAID status through the HPE Smart Storage Administrator or other management tools provided by HPE.
Expand or Modify RAID:
If needed, you can later expand the RAID 6 array or modify its configuration through the Smart Storage Administrator.
2. ESXi Installation:
a. Obtain ESXi Installer:
Download the ESXi ISO image from the VMware website.
b. Prepare Boot Media:
Create a bootable USB drive with the ESXi installer using tools like Rufus or UNetbootin.
c. Install ESXi:
Insert the bootable USB drive into the server.
Power on the server and boot from the USB drive.
d. ESXi Installation Wizard:
Follow the on-screen prompts to install ESXi.
Select the installation disk (usually the local storage on your server).
Hello everyone, in this video I am going to install mikrotik router os on hyper-v and after that I will be configure routerOS to provide internet access for clients by configuring dhcp server , create a nat rule , setup pptp vpn server. Ok lets start
Hardware Requirements:
MikroTik router device (such as a MikroTik RouterBOARD)
Ethernet cables
Computer with an Ethernet port
Power source for the router
Initial Setup:
Connect the MikroTik router to a power source and to your computer using an Ethernet cable. The router usually has a default IP address for the initial configuration, such as 192.168.88.1. Ensure that your computer is set to obtain an IP address automatically through DHCP.
Access the Router:
Open a web browser on your computer and enter the default IP address of the MikroTik router in the address bar (e.g., http://192.168.88.1).
You should see the MikroTik login page. The default username is “admin,” and there is no password by default. It is crucial to change the default password during the initial setup for security reasons.
Basic Configuration:
Once logged in, you can start configuring the router. Here are some basic configurations:
Set a strong password for the “admin” user.
Set the router’s hostname.
Configure the time zone.
Set the DNS servers.
LAN Configuration:
Configure the LAN (Local Area Network) settings, including the IP address and subnet mask for the router’s LAN interface.
You can create DHCP server pools to assign IP addresses to devices on your local network automatically.
WAN Configuration:
Configure the WAN (Wide Area Network) interface, which could be connected to your internet service provider (ISP). This often involves configuring the IP address, subnet mask, gateway, and DNS servers provided by your ISP.
Set up NAT (Network Address Translation) if you have multiple devices on your LAN and want them to share a single public IP address.
Firewall Configuration:
Create firewall rules to control incoming and outgoing traffic. MikroTik routers have a powerful firewall system that allows you to filter and control traffic based on various criteria.
Security and Access Control:
Configure access control lists (ACLs) to restrict or allow specific traffic.
Enable SSH or secure Winbox access for remote management and disable insecure services like Telnet.
Additional Features:
Depending on your needs, you can configure various additional features such as VPNs, VLANs, QoS (Quality of Service), routing protocols, and more.
Save and Backup Configuration:
After configuring your MikroTik router, make sure to save your configuration settings and create regular backups. This can be done through the router’s web interface.
Testing:
Test your network to ensure everything is working as expected. Check internet connectivity, LAN connectivity, and any specific services or features you’ve configured.
Documentation:
Keep thorough documentation of your MikroTik router’s configuration, including any changes you make over time. This will be helpful for troubleshooting and future reference.