Tag Shared

Certainly, attaching a QNAP iSCSI disk to a Windows system involves several steps. Below is a general guide, but please note that specific steps may vary depending on the QNAP NAS model and the version of QTS firmware. Always refer to the documentation provided by QNAP for your specific model.

1. Configure iSCSI on QNAP NAS:

• Log in to the QNAP NAS web interface.
• Go to “Control Panel” > “Storage & Snapshots” > “iSCSI Storage.”
• Create an iSCSI target and specify the settings, such as the target name and access permissions.
• Create an iSCSI LUN (Logical Unit Number) within the target, specifying its size and other relevant parameters.
• Note the iSCSI Target IQN (iSCSI Qualified Name) and the IP address of your QNAP NAS.

2. Connect Windows to the iSCSI Target:

• On your Windows machine, open the iSCSI Initiator.
  • You can open it by searching for “iSCSI Initiator” in the Start menu.
• In the iSCSI Initiator Properties window, go to the “Targets” tab.
• Enter the IP address of your QNAP NAS in the “Target” field and click “Quick Connect.”
• In the Quick Connect window, select the iSCSI target from the list and click “Connect.”
• In the Connect to Target window, check the box next to “Enable multi-path” if your QNAP NAS supports it.
• Click “Advanced Settings” to configure CHAP (Challenge-Handshake Authentication Protocol) settings if you have set up authentication on your QNAP NAS.
• Click “OK” to connect to the iSCSI target.

3. Initialize and Format the iSCSI Disk:

• Once connected, open the Disk Management tool on your Windows machine.
  • You can open it by searching for “Create and format hard disk partitions” in the Start menu.
• You should see the new iSCSI disk as an uninitialized disk.
• Right-click on the uninitialized disk and choose “Initialize Disk.”
• Right-click on the newly initialized disk and select “New Simple Volume.”
• Follow the wizard to create a new partition, assign a drive letter, and format the disk with your preferred file system.

4. Access the iSCSI Disk:

• After formatting, the iSCSI disk should be accessible through the assigned drive letter.
• You can now use the iSCSI disk for storage purposes, and it will behave like any other locally attached storage device.

Remember to follow best practices for iSCSI security, such as enabling CHAP authentication and restricting access to specific IP addresses, especially if your QNAP NAS is accessible over the internet. Always refer to the specific documentation for your QNAP NAS model for accurate and up-to-date instructions.

Hello everyone in this video i will configure traffic shaping and session limit for my test web server , By enforcing session limits, you can prevent a single client or a group of clients from establishing an excessive number of connections, thus reducing the impact of DDoS attacks, also Web servers have finite resources, including CPU, memory, and network bandwidth.

Allowing too many concurrent sessions can lead to resource exhaustion, resulting in degraded performance or even server crashes. The FortiGate Traffic Shaper is a feature within the Fortinet FortiGate firewall platform that allows you to control and manage network traffic by applying quality of service (QoS) policies. The Traffic Shaper provides a set of tools to shape, control, and monitor network traffic based on predefined policies and rules.

1. Log into the FortiGate Web Interface:

• Open a web browser and enter the IP address of your FortiGate device.
• Log in with administrator credentials.

2. Navigate to Security Policies:

• In the FortiGate web interface, go to “Policy & Objects” or a similar section, depending on your FortiGate’s firmware version.

3. Create or Edit a Security Policy:

• You can either create a new security policy or edit an existing one. A security policy defines the rules for traffic passing through the firewall.

4. Configure the Session Limits:

a. General Settings: – In the security policy configuration, you’ll find an option to set session limits. Look for a section labeled “Session Options” or similar.

b. Select Session Limit Type: – Choose the appropriate session limit type based on your requirements: – Limit: Sets a maximum limit on the total number of concurrent sessions allowed for this policy. – Per-User Limit: Sets a session limit per user, which is useful in user-based authentication scenarios. – Per-IP Limit: Sets a session limit per source IP address.

c. Configure Limit Value: – Specify the numeric value for the session limit. For example, if you chose “Limit” and set the value to 100, this policy would allow a maximum of 100 concurrent sessions.

d. Define Action on Limit: – Choose what should happen when the session limit is reached. Common actions include: – Accept: Continue accepting new sessions, ignoring the limit. – Drop: Reject new sessions once the limit is reached. – Log: Log information about sessions that exceed the limit. – Rate Limit: Throttle the rate of new sessions when the limit is reached.

e. Idle Timeout and Session Timeout: – These settings help manage session duration: – Idle Timeout: Set the maximum time a session can remain idle (no traffic) before it’s terminated. This prevents stale connections from consuming resources. – Session Timeout: Define the maximum duration a session can last before being terminated, regardless of activity.

f. Advanced Session Options (Optional): – Depending on your FortiGate firmware version and specific requirements, you may have additional session-related options to configure. These could include session helpers for specific protocols or advanced settings for more granular control over session behavior.

5. Save and Apply the Configuration:

• Once you’ve configured the session limits according to your requirements, save the changes and apply the updated security policy.

6. Testing and Monitoring:

• Thoroughly test your firewall rules and session limits to ensure they align with your network’s security and performance needs.
• Monitor firewall logs and session statistics to track how the session limits are being enforced and whether any adjustments are needed.

Please note that the exact steps and terminology may vary depending on your FortiGate firmware version. Consult the official Fortinet documentation or seek assistance from Fortinet support for version-specific details or advanced configurations. Additionally, it’s important to regularly review and update your security policies to adapt to changing network requirements and threats.